1 Ton Yamaha Engine Powered Capstan Winch for cable pulling and hoisting
Application
1. It is used for tower erection
2. It is used for pole setting
3. Stringing wire in electrical power line construction.
Winch can be modified as per requirement, such as changing curve capstan into straight even cylindrical shape and coming with steel rope.
Structure
1. roller wheel
2. transmission
3. diesel or gasoline engine
4. the base frame composition
5. Motor cutter grinding works: winch is used to pull the slot groove rope connected directly to gasoline or diesel engine, electric motor as the driving force, after shifting box of gear to achieve the required speed, the machine is located on steel, ro. bust and easy to move.
Yamaha Engine
Features
Small power yamaha engine
low vibration,low noise
Easy to operate and high safty
Precise Machining Technique
Long Life of the Machine
Delicate and Beautiful Appearance Design
Broader Applicable Scope
Good quality and less malfunction
Specifications
Fuel:gasoline
Stroke:4 stroke
Cylinder: Single Cylinder
Cold Style: Air-cooled
Start: Kick Start
Displacement: 250cc
Starting System: Recoil/Electric Key start
Transmission and Brake System
1. Belt driven transmission
2. Automatic clamp brake and clutch brake transmission interlock two brakes are braking action in positive and negative directions.
Maintenance and safe use
1. Engine use and maintenance, according to the machine instructions.
2. Lifting shall not exceed in line with use.
Lubricating oil surface must be kept within 1/4
3. gearbox, before using the machineoutside the bearing should add oil.
4. Automatic burning cars and interlock brakes, should always pay attention to the wear of the friction plate, the automatic braking gear and back tighten loose gap of 0.5mm, if the gap is greater than 1.5 mm, you must replace the friction plate, or likely to cause accidents.
5. Automatic brake load the gearbox, automatic normal lifting, due to the reverse gearis stuck, there is no "beep beep" sound when the back loose.
6. The bearing support frame is anchored on both sides of the reel anchor point, it can not be used as an anchor point to another location.
7. After the long-distance transport aircraft, before use, must be a detailed examination of the various components fastening screws loose, ministries parts is stagnant leak.Gearbox ZL4 aluminum body with screws on it should not be too tight and unnecessarydisassembly, but can not use a hammer.
Technical Data
| Model NO. | Engine | Gear | Pulling Speed(m/min) | Rated Pulling Force(Ton) | Weight(Kg) |
| JJM1-Q | Yamaha engine 4 HP | (Slow) | 10.0 | 0.8 | 36 |
| (Fast) | 15.0 | 0.6 |
| Reverse | 12.0 | No Lifting! |
| Electric motor | (Slow) | 10.0 | 0.8 | 48 |
| (Fast) | 15.0 | 0.6 |
| Reverse | 12.0 | No Lifting! |
Practical Application
Product Tags:
|
|
1 Ton Yamaha Engine Powered Capstan Winch for cable pulling and hoisting Images
|
